This roundup compares ADA compliant grab bars from Moen, Stardrix and HealthCraft.
Bar lengths span from 18-inch single bars to a 3-piece commercial set with 18", 36", and 42" bars.
The bars and coordinated sets are rated by their manufacturers to support up to 500 lbs when correctly installed.
| Stardrix 36-Inch ADA Compliant Grab Bar |
| High-Capacity Concealed Look | Weight Capacity: 36-inch bar with 1.5" outer diameter. | Bar Length & Diameter: Rated to exceed ADA and ANSI standards at 500 lbs. | Mounting/Installation Design: Concealed flange with snap-on cover. | View at Stardrix | Read Our Analysis |
| Moen Home Care 36-Inch Grab Bar (R8936P) |
| Branded Grip with Warranty | Weight Capacity: 36-inch bar with 1.5-inch diameter. | Bar Length & Diameter: Peened texture stainless finish for grip. | Mounting/Installation Design: Backed by Moen's Limited Lifetime Warranty. | View at Moen | Read Our Analysis |
| Moen R8718PB 18-Inch Polished Brass Grab Bar |
| Polished Brass Accent | Type: 18-inch polished-brass grab bar | Specification: 1.25-inch diameter; up to 500 lb properly installed | Design: Concealed-screw SecureMount design | View at Moen | Read Our Analysis |
| Moen R8936 36-Inch Stainless Concealed-Screw Grab Bar |
| Budget ADA Bar | Type: 36-inch stainless-steel grab bar | Specification: 1.5-inch diameter; up to 500 lb when correctly mounted | Design: Concealed-screw SecureMount design | View at Moen | Read Our Analysis |
| Moen R8718P 18-Inch Peened Grab Bar |
| Compact 18-Inch ADA Bar | Type: 18-inch peened stainless-steel grab bar | Specification: 1.25-inch diameter; up to 500 lb with proper installation | Design: Concealed-screw SecureMount design | View at Moen | Read Our Analysis |
| Stardrix 3-Piece ADA Grab Bar Set - Brushed Stainless Steel |
| Full ADA Bar Set | Type: Three bars:18,36 and 42 inches | Specification: 1.5-inch diameter; up to 500 lb per maker | Design: Brushed stainless steel with concealed flanges | View at Stardrix | Read Our Analysis |
| Moen 8736 36-Inch Stainless Concealed-Screw Grab Bar |
| Stud-to-Stud Stability | Type: 36-inch stainless-steel grab bar | Specification: 1.25-inch diameter; up to 500 lb correctly installed | Design: Concealed-screw SecureMount design | View at Moen | Read Our Analysis |
| Moen R8736P 36-Inch Peened Grab Bar |
| Anti-Slip Knurled Grip | Type: 36-inch peened stainless-steel grab bar | Specification: 1.25-inch diameter; up to 500 lb when correctly installed | Design: Textured finish and concealed screw covers | View at Moen | Read Our Analysis |
| Moen R7436 36-Inch Grab Bar |
| Simple Exposed-Screw Mount | Weight Capacity: 36-inch bar with 1.25-inch diameter. | Bar Length & Diameter: Exposed-screw mounting design. | Mounting/Installation Design: Backed by Moen's Limited Lifetime Warranty. | View at Moen | Read Our Analysis |
| HealthCraft Wave Grab Bars 24-Inch 2-Pack - Matte Black |
| Ready-to-Mount Bar Pair | Type: Two24-inch Wave grab bars, left and right | Specification: 1.25-inch stainless rails; up to 500 lb correctly mounted | Design: Matte black with concealed nine-hole flanges | View at HealthCraft | Read Our Analysis |
More Details on Our Top Picks
1. Stardrix 36-Inch ADA Compliant Grab Bar
Built from 18-gauge stainless steel with a 1.5" outer diameter for a sturdy grip.
The listing states it exceeds ADA, ANSI, and related compliance standards while supporting up to 500 lbs, backed by a limited lifetime warranty.
A concealed flange with a snap-on cover hides mounting screws for a modern look, and the 12-hole design is described as compatible with most wall anchors.
Weight capacity is rated at 500 lbs, matching the 3-piece Stardrix set in this roundup.
2. Moen Home Care 36-Inch Grab Bar (R8936P)
This 36-inch, 1.5-inch diameter bar supports up to 500 lbs when installed in a stud or with SecureMounts.
It uses Moen's SecureMount design intended for easy, secure installation, though the mounts are sold separately.
The peened-texture stainless finish is described as coordinating with other Moen bathroom accessories and hardware.
It is described as ADA compliant, corrosion-resistant, and backed by Moen's Limited Lifetime Warranty.
SecureMount anchors needed for the full 500-lb support are sold separately.
Moen R8718PB 18-Inch Polished Brass Grab Bar
The Moen R8718PB adds a polished-brass accent with a bright, reflective finish over stainless-steel construction. Its 18-inch length and 1.25-inch grip suit a compact support location. Concealed screws cover the mounting hardware, and the SecureMount design supports secure attachment to suitable studs. Moen lists support up to 500 pounds with proper installation, ADA specifications and a limited lifetime warranty.
Moen R8936 36-Inch Stainless Concealed-Screw Grab Bar
The Moen R8936 provides a straightforward 36-inch stainless-steel bar with a 1.5-inch grip. Concealed screws keep the mounting hardware covered, while the SecureMount design supports installation into structural studs at the required angle. Moen rates support up to 500 pounds when correctly installed and lists compliance with ADA specifications. The bar carries a limited lifetime warranty. Select the mounting method and hardware for the actual wall construction.
Moen R8718P 18-Inch Peened Grab Bar
This compact Moen bar has an 18-inch reach and a 1.25-inch grip. Its peened stainless-steel finish adds texture, and concealed covers hide the mounting screws. The SecureMount design supports mounting into studs, with the maker rating support up to 500 pounds when installed correctly. Moen lists ADA specifications and a limited lifetime warranty. Use structural backing and the manufacturer installation instructions.
Stardrix 3-Piece ADA Grab Bar Set - Brushed Stainless Steel
This coordinated Stardrix set supplies three bars measuring 18, 36 and 42 inches for a bathroom with several support locations. The 18-gauge stainless-steel bars have 1.5-inch grips, concealed snap-on flange covers and 12-hole mounting plates. The maker rates each bar to support up to 500 pounds with correct installation. Plan the location and structural backing for each bar; final accessibility compliance depends on the complete installation.
Moen 8736 36-Inch Stainless Concealed-Screw Grab Bar
The Moen 8736 retains a slim 1.25-inch grip in a 36-inch stainless-steel bar. Its SecureMount design provides mounting flexibility into suitable studs, and concealed-screw covers give a tidy appearance. Moen lists support up to 500 pounds with correct installation, ADA specifications and a limited lifetime warranty. Check the wall structure and follow the maker installation guide before fitting the bar.
Moen R8736P 36-Inch Peened Grab Bar
For a textured gripping surface, the Moen R8736P uses a peened stainless-steel finish across a 36-inch bar. The 1.25-inch diameter suits a slimmer handhold, with concealed screws and SecureMount mounting. Moen lists support up to 500 pounds when properly installed and compliance with ADA specifications. Moen provides a limited lifetime warranty. Secure the bar to appropriate backing according to the manufacturer instructions.
9. Moen R7436 36-Inch Grab Bar
This 36-inch bar has a 1.25-inch diameter and an exposed-screw mounting style rather than a concealed flange.
It supports up to 500 lbs when installed in a stud or with SecureMount anchors, which are sold separately.
The listing describes a lightly brushed warm grey stainless finish, durable stainless steel construction, ADA compliance, and a Limited Lifetime Warranty.
SecureMount anchors required for the 500-lb support are sold separately.
HealthCraft Wave Grab Bars 24-Inch 2-Pack - Matte Black
This HealthCraft set provides two 24-inch support bars. Each pack includes left- and right-oriented Wave bars in matte black, with curved profiles and 1.25-inch stainless-steel rails. Concealed nine-hole flanges provide mounting positions, and the maker rates each bar for up to 500 pounds when correctly installed. HealthCraft lists ADA compliance and a limited lifetime warranty. Hollow-wall anchors are optional accessories sold separately.
Frequently Asked Questions
What are the ADA requirements for grab bars?
Listings in this roundup describe ADA compliant grab bars as meeting specifications for weight capacity, diameter, and mounting, such as a 500-lb load capacity and 1.25 to 1.5 inch diameters.
What are the best ADA compliant grab bars?
This roundup includes ADA compliant options ranging from the straightforward Moen R8936 36-inch bar to the three-piece Stardrix set for multi-fixture bathrooms.
Are Moen grab bars ADA compliant?
Yes, the Moen R8936P, R8718PB and R7436 grab bars in this roundup are each described by the maker as complying with ADA specifications.
Category verdict
For a full ADA-compliant bar set spanning multiple fixtures, the Stardrix set offers 18-, 36- and 42-inch bars rated to support up to 500 lbs when correctly installed.
For a single high-capacity bar with a concealed-screw look, the Stardrix 36-Inch bar is rated to exceed ADA and ANSI standards at 500 lbs.
Buyers seeking a straightforward bar may prefer the Moen R8936, while those wanting a textured grip may prefer the peened Moen R8736P.